(Comments posted here are more likely to get a response 😉)
Building a waterfall from scratch is actually a lot easier than you might think, with the help of an old pillow you too will have no trouble building a similar waterfall after watching the video.
The diorama is 1:87th scale and inspiration was drawn from Multnomah Falls in Oregon USA.
The bridge I created to complete this project is available to download right here, just scroll down and you will see a tab to download the bridge so you build one as well.
If you enjoy watching be sure to help support the channel by joining my Patreon page:
Additional content that will help you recreate and follow along with the build, some of the 3D printer files are still experimental and may require some tinkering in order to get them to print successfully. Also, nearly all of the 3D printer files are designed for resin 3D printers, trying to print them using a filament 3D printer may not be possible!
But in any case, I hope you enjoy the extra content.
Download the 3D printer files for the Bridge
Don't forget to subscribe to my YouTube channel so you don't miss future uploads. They don't happen often but I always try to ensure every video is packed full of useful tips and tricks to help you achieve you modelling dreams.