3D Printer Files
Public service announcement:
These files are scaled specifically to be HO scale and have very intricate detail, they are designed to be printed using a DLP 3D printer. If you are printing with a FDM filament printer you may find they don't print so well in HO scale.
These files are scaled specifically to be HO scale and have very intricate detail, they are designed to be printed using a DLP 3D printer. If you are printing with a FDM filament printer you may find they don't print so well in HO scale.
Extras:
Add that extra level of detail by including a window washing platform on your building. I built this model using TinkerCad and modeled it using a photo from google as a reference.
In order to print all the fine detail that this model has you'll need to use a resin based printer that can resolve fine details.
Add that extra level of detail by including a window washing platform on your building. I built this model using TinkerCad and modeled it using a photo from google as a reference.
In order to print all the fine detail that this model has you'll need to use a resin based printer that can resolve fine details.
|
|
If you do decide to print this model be sure to send me photo of it on the side of your building 😃
On a side note... you will need a 2mm diameter piece of styrene rod or similar for the cross arm, the pulley unit will need to be printed twice and it gets glued on each side of the cross arm after it has been attached to the extension arm.
You will also need a piece of 0.5mm styrene rod that are part of the hydraulic rod assembly that holds arm up.
On a side note... you will need a 2mm diameter piece of styrene rod or similar for the cross arm, the pulley unit will need to be printed twice and it gets glued on each side of the cross arm after it has been attached to the extension arm.
You will also need a piece of 0.5mm styrene rod that are part of the hydraulic rod assembly that holds arm up.
| window_cleaner_platform_ho_scale.zip |
Legal notice for all .stl files pertaining to the Window Cleaner Platform model:
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
|
1- Rooftop Vent
|
| ||
|
2 - Wall Pipes
|
| ||||
|
3 - Fuse Boxes
|
| ||||
|
4 - Window Air Conditioner
|
| ||
|
5 - Ladder with Cage
|
| ||
|
6 - Safety Rails
|
| ||||
|
7 - Air Conditioning Ducts
|
| ||||
|
8 - Large Rooftop Air Conditioner v1
|
| ||
|
9 - Large Rooftop Electrical Box
|
| ||
|
10 - Large Rooftop Air Conditioner v2
|
| ||
|
11 - Rooftop Pipes
|
| ||||
Some of the 3D files above were solely created by me however there are a number of files that were originally designed by Game Tree 3D Print Scenics on Thingiverse.
Here is a link to the original file: https://www.thingiverse.com/thing:2626207
All the details from the original files were adjusted to be HO scale and some of the finer details were adjusted so they would show up a little better when 3D printed.
This is not the complete list of files used... over the coming days I will add more of the files including some of the interior files I used for detailing the rooms inside the building.
Here is a link to the original file: https://www.thingiverse.com/thing:2626207
All the details from the original files were adjusted to be HO scale and some of the finer details were adjusted so they would show up a little better when 3D printed.
This is not the complete list of files used... over the coming days I will add more of the files including some of the interior files I used for detailing the rooms inside the building.